ISSN 2413-6166 (Online) · ISSN 1991-0290 (Print) · DOI prefix 10.17721/moca
УкрEn

Indirect Spectrophotometric Determination of Phosphorus Content in Steels and Alloys Based on Separation of 12-Tungstophosphate with Butyl Acetate and Absorption of Tungsten Phenylfluoronate

Mohammed E. A. Al-Shwaiyat, Anna A. Gres, Andriy B. Vishnikin
,§
† Department of Basic and Applied Science, Zarka University College, Al-Balqa Applied University, 19117, Al-Salt, Jordan
‡ Department of Analytical Chemistry, Chemical Faculty, Oles Honchar Dnipro National University, 72 Gagarin Av., Dnipro, 49010, Ukraine
§ Department of Analytical Chemistry, Institute of Chemistry, Faculty of Science, Pavol Jozef Šafárik University in Košice, 11 Moyzesova, 04001, Košice, Slovak Republic *e-mail: shwaiyat@gmail.com

Abstract

A method for indirect extraction-spectrophotometric determination of phosphorus using the formation of 12-tungstophosphate (12-TPC) heteropoly complex has been developed. The conditions for the formation and extraction separation of the 12-TPC with butyl acetate were studied. 12-TPC is formed and extracted over a wide pH range — from 0.05 to 0.4 M (as H+)—at a tungstate concentration of 2 mM. After separation, tungsten in the composition of 12-TPC is determined by the absorption of its complex with phenylfluorone. The apparent molar absorption coefficient significantly exceeds the known methods and equals to 3.3×105 mol–1 L cm−1 at 515 nm. Calibration range for phosphorus is from 3 to 30 µg L−1 with LOD of 1.0 µg L−1 and correlation coefficient of 0.9998. The method is simple to implement, rapid, highly sensitive and has good reproducibility. The possibility of eliminating the interfering influence of a number of elements that may be present together with phosphorus in alloyed steels, namely chromium, nickel, vanadium, molybdenum, and tungsten, has been studied. A method for analyzing steel and other alloys containing these elements has been developed and verified by analyzing standard samples.

Keywords:spectrophotometryphosphorus determinationanalysis of steelsextraction

How to cite

Mohammed E. A. Al-Shwaiyat, Anna A. Gres, Andriy B. Vishnikin. Indirect Spectrophotometric Determination of Phosphorus Content in Steels and Alloys Based on Separation of 12-Tungstophosphate with Butyl Acetate and Absorption of Tungsten Phenylfluoronate. Methods Objects Chem. Anal. 2026, 21(1), 38-47. https://doi.org/10.17721/moca.2026.38-47